Filter By:

Electronics

PowerTap P1 Pedals
$799.99
These aren't ordinary pedals. The P1 pedal is a simple, intelligent and uncompromising design that provides the same proven PowerTap accuracy and reliability. The simple one-piece design easily mounts to any crank and does not require calibration nor installation angle setting, providing a true “plug-and-play” experience. The P1 also features dual band ANT+ and Bluetooth SMART for compatibility with a multitude of head units and smart devices. Plus, the independent measurement opens the possibility for a new set of pedaling metrics previously unavailable to help give you the ultimate competitive edge.
PowerTap Single-Sided Pedals
$529.99
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
CycleOps PowerCal Power Meter with Speed Sensor
$139.99
Now you can measure your power output without replacing any components on your bicycle! CycleOps' PowerCal gives you real-world and real-time data via a convenient chest strap. It's compact, light, and easy to bring along on every ride and on any bike so you get consistent training metrics. After the initial setup, the PowerCal uses complex scientific algorithms based on your heart rate to send accurate power data to your ANT+ compatible head unit (sold separately) so you can maximize every training session. The included speed sensor attaches to your bike for even more data. And, because the PowerCal is attached to you and not your bike, you can use it to track progress across multisport training disciplines as well.
PowerTap PowerCal Bluetooth Smart with Speed/Cadence Sensor
$109.99
Now you can measure your power output without replacing any components on your bicycle. PowerTap's PowerCal Bluetooth Smart with Speed/Cadence Sensor gives you real-world and real-time data via a convenient chest strap. It's compact, light, and easy to bring along on every ride and on any bike so you get consistent training metrics. After the initial setup, the PowerCal uses complex scientific algorithms based on your heart rate to send accurate power data to your Bluetooth compatible device (sold separately) so you can maximize every training session. The included speed/cadence sensor attaches to your bike for even more data. And, because the PowerCal is worn by you and not on your bike, you can use it to track progress across multisport training disciplines as well.
CycleOps PowerCal Power Meter
$99.99
Now you can measure your power output without replacing any components on your bicycle! CycleOps' PowerCal gives you real-world and real-time data via a convenient chest strap. It's compact, light, and easy to bring along on every ride and on any bike so you get consistent training metrics. After the initial setup, the PowerCal uses complex scientific algorithms based on your heart rate to send accurate power data to your ANT+ compatible head unit (sold separately) so you can maximize every training session. And, because it's attached to you and not your bike, you can use the PowerCal to track progress across multisport training disciplines as well.
Timex Timex Ironman Triathlon
$89.99

Timex Ironman Triathlon

$69.99Free Shipping!

 FREE SHIPPING & Tax Included*!! *on orders of $45 or more in the 48 states unless otherwise noted. Low price guarantee: If you see a lower price with shipping we'll beat it Plus a FREE GIFT! Just call or e-mail, see policy's page for more details...

The  Ironman Triathlon 75-Lap Sleek OVA watch is Designed to be worn on the small, narrow part of the wrist , it  Features 75 lap memory recall with split or lap time display. Three alarms, two interval timers 100hr chronograph 2 time zones and a 6 year battery life, and is Water resistant to 100m. This Watch certainly stands up to it's slogan!! As everyone knows- Timex is a name you can trust!!

PowerTap PowerCal Dual ANT+/BLE
$69.99
The PowerCal is the world’s first-ever power meter calculated from heart rate. At the time of its release, it was an incredible innovation combining two important training metrics: heart rate and power. And after all these years, the PowerCal remains as one of Powertap's most popular products, and for good reason—athletes of all kinds trust it ride after ride. - First-ever power meter calculated from heart rate. - Most affordable way to begin power training. - Bluetooth Smart or ANT+ compatible. - Signal Transmission: Bluetooth Smart (Cycling Power Service, Heart Rate Service, Device Info Service) or ANT+ (2.4 GHz) - Operational Temperature: 0-40C/32-103F - Battery Type: CR2032 - Battery Life: 400 Operational Hours (Bluetooth); 600 Operational Hours (ANT+) - The PowerCal is not a waterproof device and should not be submerged in water - PowerCal BLE is compatible exclusively with the PowerTap mobile application on iPhone 4S or higher. - PowerCal ANT+ is compatible with android and iPhone/iPad devices with use of appropriate ANT+ adapter key - PowerCal ANT+ is not compatible with cervos (little yellow computer) or older grey indoor cycle consoles.
Page 1 of 1